Glass, Ceramic, Tile, Marble and Granite holes drilling
Customized
OEM, ODM
Package
Opp bag, Plastic drum, Blister card, Sandwich packing
MOQ
500pcs/size
Notice for use
1. Please add water as coolant and drill slowly.2. Start drilling the surface at an angle of 45 degrees and align 90 degrees when forming the hole.3. Never use an electric drill when the machine is in a hammering state.4. The hole does not need to be laborious, because the cutting is clean.
How to Cut Successfully?1. Make a half-moon-shaped notch on the glass/tile/stone drill with 45 degrees.2. Slowly raise the drill bit to 60 degrees, and then lightly drill.3. Reach 90 degrees and continue drilling.4. Finally, the glass/brick/stone is drilled. This technique requires the drill bit to "shake" instead of applying steady pressure all the time.ApplicationPerfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass.
How to Cut Successfully? 1. Make a half-moon-shaped notch on the glass/tile/stone drill with 45 degrees. 2. Slowly raise the drill bit to 60 degrees, and then lightly drill. 3. Reach 90 degrees and continue drilling. 4. Finally, the glass/brick/stone is drilled. This technique requires the drill bit to "shake" instead of applying steady pressure all the time.
Application Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass.
